MIL-PRF-8565/15A
6.1 The following paragraphs are not applicable:
3.5.10 Heaters.
3.6.5 Marking for batteries with heaters.
3.8.16 Output performance.
3.8.17 Cold and hot temperature charge.
4.5.28 Output performance test.
4.5.29 Cold and hot temperature charge test.
6.2 Modify the following paragraphs:
6.2.1 Change "18.0 volts" to "20.0 volts" in the following paragraphs:
4.5.6 Electrical test preparation, first sentence.
4.5.7 Capacity discharge, second sentence.
4.5.11 Capacity discharge at 49°C (120°F), third sentence.
4.5.12 Charge and discharge test at low temperature, step c and step f, second sentence.
4.5.17 Temperature rise and float test, step e, second sentence.
4.5.22 Ground storage test, step d and i.
4.5.23 Physical integrity at high temperature test, step b and k.
4.5.26 Shelf life test, sixth sentence.
TABLE III Capacity performance requirements, requirements (1), (2), and (3).
6.2.2 Modify the following paragraphs as stated:
3.5.5 Receptacles. Add the following: "For D8565/15-1, the female receptacle (front view)
shall be dimensionally equal to MS3509, style 1. The receptacle may be integrally molded in the
container."
3.6.4 Battery caution marking. Delete MIL-PRF-8565 paragraph in its entirety and substitute
the following: "Marking for Label 2 shown on figure 1 shall show the following with lettering
height not less than 6.35mm (0.25 inch). The marking shall be in white or black print.
MAINTENANCE-FREE BATTERY
DO NOT REMOVE COVER
PROCESS THIS BATTERY IN ACCORDANCE WITH APPROVED PROCEDURES ONLY
SEE NAVAIR 17-15BAD-1 OR APPLICABLE SERVICE T.O."
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business