MIL-PRF-8565/13A
4.5.28 Output performance test. Delete the text and substitute: "This test consists
of the following steps.
"a. Charge each battery in accordance with paragraph 4.4.2, as modified by
MIL-PRF-8565/13.
"b. Stabilize the three samples in accordance with 4.4.1 of MIL-PRF-8565 at the
applicable test temperatures as specified in requirements (3), (4), and (5) in
table III of MIL-PRF-8565/13.
"c. Discharge sample 1 in accordance with requirement (3) in table III of
MIL-PRF-8565/13.
Discharge sample 2 in accordance with requirement (4) in table III of
MIL-PRF-8565/13.
Discharge sample 3 in accordance with requirement (5) in table III of
MIL-PRF-8565/13.
"d. Each sample shall meet the minimum cutoff voltage of the applicable
requirements in table III of MIL-PRF-8565/13."
6.3 Add the following paragraphs:
"3.5.11 Latching handles. The battery shall be equipped with two lever latch
handles, Camloc part number 61L2-1-2AA or equivalent. The handles shall be located as
shown on figure 1 of MIL-PRF-8565/13.
3.5.12 Circuit breaker. The battery shall be equipped with a 20-ampere thermal
overload (trip-free) circuit breaker, type MS3320-20. The circuit breaker shall be located
as shown on figure 1, and wiring connections shall conform to figure 2. Both figures 1
and 2 are in MIL-PRF-8565/13. The circuit breaker shall be mounted in a suitable
housing extending from the face of the battery case, provided that the total extension
(housing plus circuit breaker) does not protrude above the top surfaces of the battery
when the circuit breaker is tripped and provided that the housing does not interfere with
the operation of the latches."
"3.8.18 Float life. When tested in accordance with 4.5.32 of MIL-PRF-8565/13,
batteries shall provide not less than rated capacity after 50 days of float charging at a
temperature of 50°C and a charging rate of 40 milliamperes."
"4.5.32 Float life. The battery shall be charged at 40 milliamperes at 50 ±2°C for
a period of 50 days. At the end of this period, the battery shall be stabilized at room
temperature and discharged in accordance with 4.5.7 of MIL-PRF-8565. Examine the
battery for the requirements of 3.8.18 of MIL-PRF-8565/13."
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business