MIL-PRF-49450/5B(CR)
DRAWING NOTES:
1. All dimensions are in inches, unless otherwise specified.
2. Strap shape is optional.
REQUIREMENTS:
1. The harness assembly shall use insulated wires resistant to the battery electrolyte. The
length and color of wires shall be in accordance with Figure 1 and Table 1 or Figure 2 and Table
2.
2. All electrical connections made to the MS3474-L12-10PN receptacle and harness
devices (thermistors, thermoswitches or equal) shall be potted with a compound that will not
support flame, absorb moisture, or be damaged by battery electrolyte. Thermoswitch shall be
modified to achieve maximum height of Figure 3.
3. The thermistor or temperature sensor device shall exhibit the resistance temperature
characteristics of Figure 6.
4. The harness assembly shall be capable of withstanding the temperature and exposure of
the battery electrolyte without damage.
Revision letters are not used to denote changes due to the extensiveness of the changes.
Changes from previous issue. Marginal notations are not used in this revision to identify changes
with respect to the previous issue due to the extent of the changes.
Custodian
Preparing Activity:
Army-CR
Army-CR
(Project 6140-A833)
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business