MIL-PRF-29595A
3.8.6 Shorting protection. Individual cells or batteries shall be delivered and stored with the
leads or connector plug insulated against accidental shorting.
3.8.7 Age documentation. The manufacturer shall provide the following documentation
with each delivery of cells or batteries:
a. The maximum age of cells or cells assembled into batteries, from the time of their
initial manufacture to the time of their shipping date, shall be not greater than 180 days.
b. Batteries or cells shall be submitted for Government testing within 30 days of battery
assembly.
3.8.8 General battery safety requirements. NAVSEAINST 9310.1 requires all lithium
batteries be reviewed, tested and approved in accordance with S9310-AQ-SAF-010. Before
listing on the qualified products list, the manufacturer shall comply with the requirements of
S9310-AQ-SAF-010, unless modified by the applicable specification sheet (see 6.2.h, 6.17.1 and
6.17.2).
3.9 Detail requirements.
3.9.1 Condition of battery. The battery container shall not exhibit scratches, gouges, dents,
torn material, leakage, or other damage when inspected in accordance with 4.5.1 (see 6.6).
3.9.2 Visual and mechanical. Batteries shall be in accordance with 3.5, 3.7 and table II,
when subjected to the examination of 4.5.2.
3.9.3 Dimensions and weight. The dimensions and weight of batteries shall be as shown on
the applicable specification sheet after the inspection of 4.5.3.
3.9.4 Dielectric strength and insulation resistance. The battery and its components shall
meet the requirements of 3.8.1 after being tested in accordance with 4.5.5. The leakage current
shall not be greater than 0.5 milliamperesRMS between each of the items listed in 4.5.5.a through
4.5.5.c. The insulation resistance shall be not less than 1 megohm between each of the items
listed in 4.5.5.a through 4.5.5.c.
3.9.5 Vent tubes. If applicable, the vent tubes shall support the load without shearing,
breaking, bending, or deterioration at the point of connection with the battery or other distortion
of the case after being tested in accordance with 4.5.6 (see 4.3.4). The battery shall also meet the
requirements of 3.8.1.
3.9.6 State of charge indicator. A state of charge device with indicator having not less than
four segments and communications bus shall be incorporated when required by the applicable
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business