MIL-PRF-29595A
2.3 Non-Government publications. The following document forms a part of this document
to the extent specified herein. Unless otherwise specified, the issues of this document are those
cited in the solicitation or contract (see 6.2).
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME-Y14.38
-
Abbreviations and Acronyms (DoD adopted)
(Copies of this document are available from https://www.asme.org or ASME International, Three
Park Avenue, New York, NY 10016-5990.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein (except for related
specification sheets), the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and
in accordance with the applicable specification sheet. In the event of any conflict between the
requirements of this specification and the specification sheet, the latter shall govern.
3.2 Qualification. Cells and batteries furnished under this specification shall be products
that are authorized by the qualifying activity for listing on the applicable qualified products list
(QPL) before contract award (see 4.2 and 6.4).
3.3 Components. Components that are specified shall be in accordance with the applicable
specification. Components shall be chosen so that the battery meets the performance
requirements of this specification and if requested by the qualifying activity, the manufacturer
shall supply a certification of conformity of the component (see 6.2.e and 6.10).
3.4 Dissimilar metals. Unless protected against electrolytic corrosion, dissimilar metals
shall not contact each other (see 6.10.4).
3.5 Design. The design shall conform to the requirements specified herein when examined
in accordance with the visual and mechanical tests of 4.5.2. The design shall also conform to the
requirements specified in S9310-SAF-AQ-010 (see 6.17 and 6.18). Requirements for the
individual types of batteries are specified in the applicable specification sheets (see 3.1).
3.5.1 General. The battery shall be free from defects that will affect life, functioning, and
appearance. Batteries shall not have loose contacts, poor or improper molding or fabrication,
damaged or improperly assembled contacts, peeling, flaking or chipping of plating or finish,
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business