A-A-52499A
2.1.1.4 Braid. The braid shall be made of cloth/glass. It shall be free from any substance that may have a deteriorating effect on the insulation or on the sheath. Further, the braid shall not be adversely affected by the compounding ingredients of the insulation or sheath.
2.1.1.5 Separator. The separator shall be made of a fungus resistant material which shall be free from any substance that would have a deteriorating effect on the insulation or conductor. Further, the separator itself shall not be adversely affected by compounding ingredients used in the cable construction or process.
2.1.2 Terminals. Terminals shall be made of materials as specified in drawing 7056700.
2.2 Design and construction. Leads shall be designed and constructed as specified herein and in applicable referenced documents (see figure 1). The cable shall consist of a sheath, insulation, open braid, separator and conductor. As an optional construction, the sheath and insulation may be combined (see figure 2).
|
PIN Number |
A Length ±0.25 |
Stud Hole Size ±0.010 |
Conductor Size (AWG) |
Cable Diameter ±0.010 |
B |
C |
Reference Terminal Number Part (see note 2) |
|
A52499-1 |
14.00 |
.210 |
8 |
0.360 |
0.22 |
0.38 |
7056712 |
|
A52499-2 A52499-3 A52499-4 |
6.00 9.50 12.50 |
.395 |
2 |
0.610 |
0.44 |
0.81 |
7056730 |
|
A52499-5 A52499-6 A52499-7 A52499-8 A52499-9 |
8.25 9.25 10.50 17.25 18.25 |
.395 |
1/0 |
.672 |
.44 |
.81 |
7056732 |
FIGURE 1. Electrical lead design, construction and part numbers.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business