MIL-PRF-8565K
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME-Y14.38M
-
Abbreviations and Acronyms.
(Application for copies should be addressed to the American Society of Mechanical
Engineers, 345 East 47th Street, New York, New York 10017-2392.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein (except for related associated specifications or specification sheets), the
text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the
requirements of this specification and the specification sheet, the latter shall govern.
3.2 Qualification. The batteries furnished under this specification shall be products that are
authorized by the qualifying activity for listing on the applicable qualified products list before
contract award (see 4.2 and 6.4).
3.3 Components. Components that are specified shall be in accordance with the applicable
specification (see 6.11.1). When specified by the procuring activity or the qualifying activity, the
manufacturer shall supply a certification of conformity of the component (see 6.2).
3.4 Dissimilar metals. Unless protected against electrolytic corrosion, dissimilar metals shall
not contact each other (see 6.11.2).
3.5 Design. Each type of storage battery covered by this specification is listed in the
specification sheets. The design shall conform to the requirements specified below when
examined in accordance with the visual and mechanical tests of 4.5.2. Requirements for the
individual types of batteries are specified in the applicable specification sheets (see 3.1).
3.5.1 General. The battery shall be free from defects that will affect life, functioning, and
appearance. Batteries shall not have loose contacts, poor or improper molding or fabrication,
damaged or improperly assembled contacts, peeling, flaking or chipping of plating or finish,
mechanical damage due to testing environments, nicks or burrs of metal parts of surfaces, nor
improper or incorrect marking.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business